Installation And Operational Procedures - Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Customer Support Information

Installation and Operational Procedures

Ringer Equivalence Number (REN). The REN is used to determine the
number of devices that may be connected to the telephone line.
Excessive RENs on the line may result in the devices not ringing in
response to an incoming call. In most, but not all, areas the sum of the
RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as determined by the total
RENs, contact the local telephone company to determine the maximum
REN for the calling area.
Disconnection. You must also notify your local telephone company if
and when this equipment is permanently disconnected from the line(s).
Installation
and Operational Procedures
The manuals for your system contain information about installation and operational
procedures.
Repair Instructions. If you experience trouble because your equipment
is malfunctioning, the FCC requires that the equipment not be used and
that it be disconnected from the network until the problem has been
corrected. Repairs to this equipment can be made only by the
manufacturers, their authorized agents, or others who may be authorized
by the FCC. In the event repairs are needed on this equipment, contact
your authorized Lucent Technologies dealer or, in the USA only, contact
the National Service Assistance Center (NSAC) at 1 800 628-2888.
Rights of the Local Telephone Company. If this equipment causes
harm to the telephone network, the local telephone company may
discontinue your service temporarily. If possible, they will notify you in
advance. But if advance notice is not practical, you will be notified as
soon as possible. You will also be informed of your right to file a
complaint with the FCC.
Issue 1
June 1997
Page A-5