Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 351

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Backing Up with a Memory Card
Restore
If the restore fails because the card is damaged, the system performs a System
Erase (frigid start). Repeat the restore procedure using a different file and/or
memory card.
Wrong Type of Card
Memory Card Restore:
Inserted Memory Card is
not the correct type.
Remove and insert MERLIN
LEGEND Backup/Restore
Card.
Exit
The inserted card does not match the card option selected from the System menu.
Remove the card and repeat the restore procedure with the correct type of card.
See ''Card Types''
Board Mismatch
Console Display/Instructions
Restore x :
Restore Failure
RESTORE IS CANCELED.
Board mismatch between
control unit and file.
Exit
A mismatch exists between the hardware components present on the current
system and the hardware components reflected in the backup file. The restore is
aborted. You can do one of the following:
Repeat the restore procedure with another file.
Modify the system hardware to match the configuration of the backup file
and repeat the restore procedure with the same file.
for information about the card labels.
Additional Information
x = filename selected
Issue 1
June 1997
Page D-27
PC