Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 130

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems
Module Problems
— If a call is using a line or extension on the module being Reset and
Check the status of the reset module before performing a demand test.
Menu
Once you finish testing a module, you must restore it. Restoring a module
terminates the Busy-out or Reset condition. See ''Restore'', later in this chapter,
for instructions.
Busy-Out
Summary
Console Procedure
PC Procedure
Appropriate Modules
Time Estimate
To busy-out a module, follow the steps below.
Console Display/Instructions
From the Maintenance menu, select the Slot option.

Maintenance
Make a selection
System
Slot
Port
Exit
another line and/or extension is involved in the call, the call on the
module being reset is put on hold. In this case, the module can be
removed and replaced. However, a demand test cannot be
performed, because the module is not busied-out.
Maintenance Slot
Menu
no.
"
Any module that you are about to test
Once all calls are terminated, the busy-out completes
in less than 1 second. If calls in progress take too
long, ask the callers to hang up.
Status
Maintenance Slot
-
Enter Busy Out
Type the slot no.

Additional Information
June 1997
Page 4-40
Dial the slot
.
Yes
  
Issue 1
PC