Removing A Cti Link - Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems

Removing a CTI Link

Select Hiding Time.

Hiding Time is not shown on the display, but may be selected by
pressing the associated softkey twice.
Console Display/Instructions
CTI Link xxxx :
Make a selection
Status
Restart
Exit
The following screen appears.
CTI Link xxxx :
Enter seconds for hiding
a broken link (0-90)
xx
Exit
If you choose Exit from this screen, you have not entered any data and you
will return to the screen shown in Step 4.
If you choose Enter from this screen, you have entered data and you will
return to the screen shown in Step 4.
Removing a CTI Link
Two procedures are used for CTI link removal. They are:
Permanent Removal. When you want to permanently remove a CTI link
from the MERLIN LEGEND Communications System.
Test
Hiding Time
Enter
Additional Information
xxxx is dial plan
number, slot/port, or
logical ID.
xxxx is dial plan number,
slot/port, or logical ID.
xx is number of seconds (0–90).
default is 25 seconds. If you
enter 1 through 9, the value
is changed to a 10.
Issue 1
June 1997
Page 4-130
PC
%%