Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 34

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Introduction
Using SPM
Table 1-1 Continued
PC Key Console
n/a
5  
n/a
5  !
n/a
5  $
n/a
5  %
Enter
P
Backspace
4
Delete
6
n/a
„fv‚
SPM Function
Help. Display a help screen about SPM operations. To
exit from Help, press
Reset. Reset the communications port. For example,
if the information on the screen is garbled, try exiting
from and then re-entering the screen. If the screen
remains garbled, use
and return to the SPM Welcome screen. Note that
using + drops the modem connection.
5 !
Browse. View print reports saved with Print Opts.
Escape to shell. To use this key in sequence, you
must set DEBUG=1 in the SPM configuration file
ams.cfg. You can then use this key sequence to
execute DOS (or UNIX system) commands. To return
to SPM, type exit .
This key on your PC can be used instead of
(Enter) when Enter appears as a choice in the
7-by-24 console simulation window.
can be used instead of
4
a choice in the 7-by-24 console simulation window.
The key on your PC can be used instead of
6
(Delete) when it appears as a choice in the 7-by-24
console simulation window.
The up, down, left, and right arrow keys can be used
to highlight selections in a menu and to select the 20
line buttons below the 7-by-24 console simulation
window.
.
i
+ to clear the screen
5 !
when it appears as
%
Issue 1
June 1997
Page 1-16

$