Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 43

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Introduction
Maintenance Strategy
Frigid Start (System Erase)
!
CAUTION:
All system programming is erased. When you perform a frigid start
(System Erase), all calls are dropped, and the system configuration
information is erased. All system memory must be reinitialized,
including system programming. Then the entire system must be
rebooted.
To perform a frigid start, select
Console Procedure
PC Procedure
Considerations
System Erase
System Erase
After a System Erase, the default printer is the PC printer, not the Station
Message Detail Recording (SMDR) printer. If you want on-site printouts
from the SMDR printer, make sure you change the option.
To change the printer option, see System Programming and
Maintenance (SPM) for information on the Print Opts option on the SPM
Main Menu.
For more information on System Erase, see
Chapter 4.
System Erase
Menu
Maintenance Slot
Test System Erase
button)
System Erase
" 
is not displayed on the MLX-20L status display. To select
, press the left button on Line 5 of the display twice.
as follows:
Dial
(Line 5 of the display, left
Yes
Type
00
 
''Processor Problems''
Issue 1
June 1997
Page 1-25
00 Demand
 
in