Conclusion Of Hardware Maintenance - Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Central Office Problems

Conclusion of Hardware Maintenance

Conclusion of Hardware
Maintenance
Installing the Control Unit
Housing (Release 2.1 or Later)
After you have completed maintenance and troubleshooting on Release 2.1 or
later, follow the steps below to reinstall the control unit housing.
Installing the Top Cover
To install the top cover, see
Be sure the cords have been pressed through the wire managers at

the base of the modules.
Hold the top cover with the hooks facing you.

Engage the tabs at the rear of the top cover with the carrier.

Lower the top cover, so that the legs lock into the vents on the

module.
Installing the Front Cover
To install the front cover, see
Hook the top of the front cover onto the top cover.

Push down on the bottom of the front cover until it locks securely

on the base of the wire manager on the modules.
Figure 5-1 and follow these steps.
Figure 5-2 and follow these steps.
Issue 1
June 1997
Page 5-41