Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 162

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems
Module Problems
If the module Busy-Out is blocked by an active line or extension, the following
screen appears.
Console Display/Instructions
Choose to wait for the module to busy-out or reset the module.

Slot xx in Use:
Make a Selection
Continue Busy-Out
Reset
Exit
Observe the status screen below.

See the next section,
error messages appear.
Upgrade Slot xx:
In Progress
xx % Completed
One of the following screens appears when the upgrade has successfully
completed. If only a Restore is required to put the module back into service,
the screen below appears
Upgrade Slot xx :
Upgrade Successfully
Completed
Slot Busied Out.
Slot Restore needed.
Exit
Additional Information
xx = slot number entered in Step 3
Continue Busy-Out does not interrupt
calls in progress, but Reset does.
''Error Conditions During Firmware Upgrade''
.
Issue 1
June 1997
Page 4-72
PC


if
!