Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 268

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Central Office Problems
Checking Ports
This indicates that the problem may be at the CO end. First, make sure the
correct B-channel is selected. If the correct B-channel is selected, the customer
or Lucent Technologies representative acting as the customer's agent should
ask the CO to clear the problem from that end. If the problem is not at the CO
end, select the correct B-channel and repeat the Audit Lines procedure.
Auditing Calls
Summary
Console Procedure
PC Procedure
Appropriate Slot or Port
Time Estimate
Backup Procedure
Busy-Out or Reset
Interrupting the Test
Restore
Console Display/Instructions
From the Maintenance menu, select the Port option.

Maintenance
Make a selection
System
Slot
Port
Exit
Menu
Maintenance
al the slot and port no.
Type the slot and port
"  #
no.
 
This test can be run only on the slot and port of
a DS1 PRI B-channel.
Four minutes
Not required
Not required
You cannot interrupt this test.
Not required
Additional Information
June 1997
Page 5-38
Port B-Channel
Enter Audit Call
PC
Issue 1
Di