Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 214

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems
CTI Link Problems
Console Display/Instructions
The following screen appears if the test fails.
Test CTI Link xxxx :
Test FAILED
Exit
If the test fails, exiting from this screen will return you to the selection screen
shown in Step 4.
The following screen appears if the test passes.
Select Exit.

CTI Link xxxx :
Test Successfully
Completed
Exit
Selecting Exit returns you to the selection screen shown in Step 4 where you
can select further maintenance options or exit the maintenance routine.
Additional Information
xxxx is dial plan number,
slot/port, or logical ID.
For this screen, check the following:
1. Verify wiring
2. Go to status screen, see if
Physical link and PBX Driver Conn
are both "up"; if the PBX driver is
not loaded, PBX Driver Conn is
down
xxxx is dial plan
number, slot/port, or
logical ID.
Issue 1
June 1997
Page 4-124
PC
!
!