Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 211

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems
CTI Link Problems
The following screen appears if the port is not a CTI Link.
Station:
Make a selection
Status
Busy Out
Restore
Exit
Exiting from the non-CTI Link screen returns you to the selection screen shown
in Step 2 for you to enter a new port number and try again. The following screen
appears if the port is a CTI Link.
Console Display/Instructions
Select Status.

CTI Link xxxx :
Make a selection
Status
Restart
Exit
Select Exit.

CTI Link xxxx :
SlotPort: xxxx
Physical Link:
PBX Driver Conn:
Alarms:
Maintenance Busy:
Exit
Enter
Test
xxxx is dial plan
number, slot/port, or
logical ID.
Additional Information
xxxx is dial plan number,
slot/port, or logical ID.
xxxx is dial plan number,
slot/port, or logical ID.
Physical Link: up or down
PBX Driver Conn: up or down
Alarms: suspended or active
Maintenance Busy: yes or no
A yes in the Maintenance Busy
field means that the slot shown
in the Slot/Port field of this screen
is maintenance busy. Do a slot
restore on that slot.
Issue 1
June 1997
Page 4-121
!
PC