Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 274

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Central Office Problems
Conclusion of Hardware Maintenance
Installing the Control Unit
Housing (Release 2.0 or Earlier)
After you have completed maintenance and troubleshooting, follow the steps
below to reinstall the Release 2.0 or earlier control unit housing.
Assemble the control unit housing. See

If the housing is already assembled, go to Step 2.
If the housing is not assembled:
a. Lay the front panel(s) face down.
b. If you are housing more than one carrier, connect the front panels
c. Connect the side panels to the front panel(s) similarly.
together by lining up the arrows and then sliding the panels until
the semicircles form a complete circle.
Figure 5-3.
Issue 1
June 1997
Page 5-44