Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 28

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Introduction
Using SPM
If you do not have a hard drive, insert the SPM diskette into Drive A

and switch to Drive A if it is not already the current drive.
Start the SPM program.

Type
SPM .
Console Display/Instructions
Press any key.

Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue:
Version X.xx
Select an option by pressing one of the function keys.

SPM Main Menu
Menu: Select Function
Sys Pro-

gram
Backup

Boards

Print Opts
Monitor
!
With a Local or Remote Modem Connection
When the equipment is set up, you can perform remote maintenance by dialing
the remote processor's built-in 2400/1200-bps modem. You can dial the modem
directly or call the system operator and request to be transferred to the modem.
Both procedures are explained below.
Dialing the System Operator
If you do not know the remote access trunk number, dial the number for the
customer's system. To dial the operator, follow the steps below.
Start SPM. When the Welcome message appears, press any key.

The SPM Welcome screen appears, as shown below.
Mainte-
nance
Restore
Pass-Thru
Password
Language
Additional Information
If the main menu (see Step 4) does
not appear, or if the information on
the screen is garbled, press any
key again.
"
#
$
%

Issue 1
June 1997
Page 1-10
PC