Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 161

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems
Module Problems
Console Display/Instructions
Select the firmware to be programmed.

Upgrade Slot xx : >
aaaaaaaaaaaaaaaa Ver: aa
Select one
aaaaaaaaaaaaaaaa Ver: aa
aaaaaaaaaaaaaaaa Ver: aa
aaaaaaaaaaaaaaaa Ver: aa
Exit
Select Yes.

Upgrade Slot xx :
Slot will be Busied Out.
Do you want to continue?
Yes
No
Exit
If the firmware selected provides functionality that is different from the circuit
module's current firmware, the Maintenance display indicates that a Board
Renumber will be required once the installation is complete.
Upgrade Slot xx :
Slot will be Busied Out.
Renum board when done.
Do you want to continue?
Yes
No
Exit
Additional Information
xx = slot number entered in Step 3
Line 2 displays the firmware version
currently installed on the module.
Lines 4, 5 and 6 display firmware
versions available on the memory
card.
If an angle bracket (>) appears in the
upper right corner of the screen, you
may select More to display the next
screen with additional firmware versions
available on the memory card.
xx = slot number entered in Step 3
xx = slot number entered in Step 3
Issue 1
June 1997
Page 4-71
PC
#
$
%
…