Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 348

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Backing Up with a Memory Card
Restore
Console Display/Instructions
Observe the restore file validation screen.

Restore n :
Restore Successfully
Completed.
System is Restarting.
Please Wait.
Restore Messages
During the restore procedure, additional screens may appear to alert you to
problems with the translation memory card, the backup file or the restore
procedure. This section contains displays of each screen and information about
what to do if the screen appears.
Card Missing or Card Not Inserted Correctly
Memory Card Restore:
Verify that Memory Card
has been inserted
correctly.
Exit
The memory card is either not inserted or inserted incorrectly. The restore is
aborted. You must reinsert the card and repeat the restore procedure. This screen
may also appear if the wrong type of memory card is inserted and a restore is
requested within one minute of insertion. Verify that the card is a translation
memory card.
Additional Information
n = filename selected in Step 5
The session is finished and the
system restarts. You must enter
system programming again to
continue.
Issue 1
June 1997
Page D-24
PC