Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 26

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Introduction
Remote Programming Maintenance
Setting Up Equipment for Remote
Maintenance
To set up equipment for remote maintenance, follow the steps below while
referring to Figure 1-3
Connect the PC and modem.

Use a D8W cord to connect the modem to a T/R trunk jack.

Use a D8W cord to connect the modem to a T/R telephone.

and to Installation.
If you have an external modem, use an EIA-232-D cable.
If you have an internal modem, the connection is already
established.
Issue 1
June 1997
Page 1-8