Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 163

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems
Module Problems
If a
Board Renumber
Console Display/Instructions
Upgrade Slot xx :
Upgrade Successfully
Completed
Slot Busied Out.
Board Renumber needed.
Exit
Perform a
Board Renumber
Error Conditions During Firmware Upgrade
The following error conditions can occur during a firmware upgrade. Recovery
procedures follow each error condition.
Memory Card In Use By Another Feature
Module Upgrade:
Memory Card in use by
another feature
Exit
Select and begin the upgrade procedure again.
Exit
is also required, the screen below appears.
and/or
Restore
Additional Information
as indicated above.
Issue 1
June 1997
Page 4-73
PC
!
!