Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 276

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Central Office Problems
Conclusion of Hardware Maintenance
Figure 5-4. Installing the Control Unit Housing (Release 2.0 and Earlier)
Line up the wire clips attached to the carrier with the recesses on

the outside of the side panels. See
If the wire clips are not attached to the control unit, see "Installing the
Housing Clips" in Chapter 2 of Installation .
Push the panels back until the clips hook over the tabs and rest in

the recesses.
Slide housing cover
forward into clips
Figure 5-4.
Issue 1
June 1997
Page 5-46