Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 54

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Error Logs, Access Logs, and System Inventory
Error Logs
The most recent alarm message stays on the System Error Log screen until it is
replaced by another. The screen does not update the most recent alarm while
displayed; to see any updates, you need to exit this screen and re-enter.
Checking Permanent Errors
Follow Steps 1 through 3 above for "Checking the Error Logs." In Step 3, select
.
Permanent
Console Display/InstructionsAdditional Information
Permanent Errors:
xxxxxxxxxxxxxxxxxxxxxx
Slot xx
First
mm/dd/yy
Last
Code xxxx
Exit
Line 2 provides a brief description of the error code identified on Line 6. For
more information on an error code, see
Line 3 indicates the slot and port where the error was detected.
Line 5 indicates the error's last occurrence.
NOTE:
Depending on which entry you delete, you might clear an alarm. See
''Alarms''
Checking Transient Errors
Follow Steps 1 through 3 above for "Checking the Error Logs." In Step 3, select
.
Transient
Console Display/InstructionsAdditional Information
Transient Errors:
xxxxxxxxxxxxxxxxxxxxxx
Slot xx
First
Last mm/dd/yy
Code xxxx
Exit
>
Portxx Count xxx
mm/dd/yy hh:mm
hh:mm
in Chapter 1 for additional information about alarms.
>
Port xx Count xxx
mm/dd/yy hh:mm
hh:mm
Press the More button to page
through the permanent errors.
Press the Drop button to delete
an error log entry.
Table 2-2.
Press the More button to page
through the transient errors.
Press the Drop button to delete
an error log entry.
Issue 1
June 1997
Page 2-4
PC.
h
3
PC.
…
3