Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 349

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Backing Up with a Memory Card
Restore
Card Removed after Confirmation
Memory Card Restore:
RESTORE IS CANCELED.
System is DOWN.
The memory card was removed from the processor slot while the restore was in
progress. The restore is aborted and the system performs a System Erase (frigid
start). You must reinsert the memory card and repeat the restore procedure.
Wrong System Programming Port
Console Display/Instructions
Restore n :
Change Sys Programming
Port to Extension xxxx
before Restoring.
Exit
The system programming port is not set to the same system programming port as
that set in the backup file. The restore is aborted. Use the Inspect feature to view
the port of the file on the card. Change the system programming port to match the
port shown on the card (see "System Programming Position Assignment" in
System Programming, or System Programming Summary) and repeat the restore
procedure.
Additional Information
n = filename selected
xxxx = system programming port
extension
Issue 1
June 1997
Page D-25
PC