Fcc Notification And Repair Information - Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Customer Support Information

FCC Notification and Repair Information

FCC Notification
and Repair Information
This equipment is registered with the FCC in accordance with Part 68 of its rules. In
compliance with those rules, you are advised of the following:
Means of Connection. Connection of this equipment to the telephone
network shall be through a standard network interface jack, USOC
RJ11C, RJ14C, RJ21X. Connection to E&M tie trunks requires a USOC
RJ2GX. Connection to off-premises extensions requires a USOC RJ11C
or RJ14C. Connection to 1.544-Mbps digital facilities must be through a
USOC RJ48C or RJ48X. Connection to DID requires a USOC RJ11C,
RJ14C, or RJ21X. These USOCs must be ordered from your telephone
company. Connection to 56-Kbps or 64-Kbps facilities requires a USOC
RJ11C, RJ14C, or RJ21.
Party Lines and Coin Telephones. This equipment may not be used
with party lines or coin telephone lines.
Notification to the Telephone Companies. Before connecting this
equipment, you or your equipment supplier must notify your local
telephone company's business office of the following:
— The telephone number(s) you will be using with this equipment.
— The appropriate registration number and ringer equivalence
number (REN), which can be found on the back or bottom of the
control unit, as follows:
If this equipment is to be used as a Key system, report the
number AS593M-72914-KF-E.
If the system provides both manual and automatic selection
of incoming/outgoing access to the network, report the
number AS593M-72682-MF-E.
If there are no directly terminated trunks, or if the only
directly terminated facilities are personal lines, report the
number AS5USA-65646-PF-E.
Issue 1
June 1997
Page A-3