Checking System And Slot Status - Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems

Checking System and Slot Status

Repeat Steps 8–10 until the faulty carrier is removed.

Replacing the Carrier
After removing the faulty carrier, use the steps below as a guideline for
installing a new carrier.
Install the replacement carrier(s). See Installation for instructions.

Replace the modules with all cords connected as they were before.

Checking System and Slot Status
In addition to checking error logs,and the access log, and running module tests,
you can request System Status and Slot Status information for each module.
System Status
The power supply, processor, 400EM module, and 100D module are the only
modules that have LEDs. The System Status screen displays simulated LEDs
for the processor and for each of these modules but not for the power supply.
The System Status procedure allows you to check simulated LEDs for the
processor and other modules. This is explained in detail in "Reading the System
Status Screen," later in this chapter.
Summary
Console Procedure
PC Procedure
To check System Status, follow the steps below.
Menu
Maintenance
"  
Issue 1
June 1997
Page 4-134
System Status