Appendix D - Openflow Object Details; Flow Table; Policy Acl Flow Table - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

Appendix D - OpenFlow Object Details

Application developers can program a set of objects in the Switch using the OpenFlow protocol (version 1.3). The
programmable objects include Flow Tables, Group Table entries, and Meter Table entries. This section provides
programming descriptions for these objects.

Flow Table

Flow Table Number Assignments
Flow Table Name

Policy ACL Flow Table

Flow Table Counters
Field
Reference Count (Active
Entries)
Packet Lookups
Packet Matches
Policy ACL Flow Table
Policy ACL Flow Table Match Fields
Field
IN_PORT
IN_PHY_PORT
ETH_DST
ETH_SRC
ETH_TYPE
VLAN_VID
VLAN_PCP
IP_DSCP
IP_PROTO
IPV4_SRC
IPV4_DST
TCP_SRC
TCP_DST
UDP_SRC
Flow Table ID
0
Description
Reference count of number of active entries in the table.
Not supported.
Not supported.
Description
The input port on the Switch.
The physical input port on the Switch.
The Ethernet destination address.
Note: IPv6 flow (ETH_TYPE=0x86DD) is not supported.
The Ethernet source address.
Note: IPv6 flow (ETH_TYPE=0x86DD) is not supported.
The Ethernet frame type.
Note: The Policy ACL Flow Table is organized into two mutually exclusive logical
sub-tables. The flow entries in the IPv6 logical tables match only IPv6 packets
(ETH_TYPE=0x86DD). The non-IPv6 logical table matches any non-IPv6 packets
(ETH_TYPE≠0x86DD or when the ETH_TYPE is not specified).
The VLAN ID.
Note: This must be programmed with 0x1000 (OFPVID_PRESENT).
The VLAN priority.
The IP DSCP (6 bits in the ToS field).
The IP protocol.
The source IPv4 address.
The destination IPv4 address.
The source TCP port.
The destination TCP port.
The source UDP port.
171
Default Table Miss Action
Drop