Chapter 7 Acl; Acl Configuration Wizard - D-Link DGS-3000 Series Reference Manual

Chapter 7

ACL Configuration Wizard

Access Profile List
CPU Access Profile List
ACL Finder
ACL Flow Meter
ACL Configuration Wizard
The ACL Configuration Wizard will aid the user in the creation of access profiles and ACL Rules automatically by
simply inputting the address or service type and the action needed. It saves administrators a lot of time.
To view this window, click ACL > ACL Configuration Wizard as shown below:
The fields that can be configured are described below:
Parameter
Type
Profile Name
Profile ID
Access ID
From / To
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
ACL
Figure 7-1 ACL Configuration Wizard window
Description
Use the drop-down menu to select the general ACL Rule types:
Normal – Selecting this option will create a Normal ACL Rule.
CPU – Selecting this option will create a CPU ACL Rule.
After selecting to configure a Normal type rule, the user can enter the Profile Name for the
new rule here.
Enter the Profile ID for the new rule. When Normal is selected in the Type drop-down
menu, the range of profile ID is from 1 to 512. When CPU is selected in the Type drop-
down menu, the range of profile ID is from 1 to 5.
Enter the Access ID for the new rule. Selecting the Auto Assign option will allow the
switch to automatically assign an unused access ID to this rule. When Normal is selected
in the Type drop-down menu, the range of access ID is from 1 to 128. When CPU is
selected in the Type drop-down menu, the range of access ID is from 1 to 100.
This rule can be created to apply to four different categories:
Any – Selecting this option will include any starting category to this rule.
MAC Address – Selecting this option will allow the user to enter a range of MAC addresses
for this rule.
IPv4 Address – Selecting this option will allow the user to enter a range of IPv4 addresses
for this rule.
168