Front Panel Led Patterns During Normal Operation - HP StorageWorks 2/8-EL - SAN Switch Installation Manual

Table 4: Front Panel LED Patterns During Normal Operation
LED Location
Switch Power To right of
LED
Serial port
Port Status LED Above
each port,
on left
SAN Switch 2/8 Version 3.1.x Installation Guide
LED Color
Display
No light
Steady green
Slow-flashing
green
No light
Steady green
Slow-flashing
green
Hardware
Status
Switch is off, or Verify switch is
boot is not on and has
complete, or completed
boot failed. booting.
Switch is on. No action
required.
Error log 1. Check port
contains one or
more port
diagnostic error
messages.
2. Clear error
3. Rerun
No signal or light Check media
carrier (media or and cable.
cable) detected.
Port is online No action
(connected to required.
external device)
but shows no
traffic.
Port is online but Verify correct
segmented, device is
indicating a connected to
loopback cable port.
or incompatible
switch.
Managing the SAN Switch 2/8
Recommended
Action
status LEDs,
error log, port
media, and
cables or
loopback
plugs.
log.
diagnostics to
verify error
condition is
fixed.
71