Front Panel Led Patterns During Normal Operation - HP StorageWorks 2/16 - SAN Switch Installation Manual

Table 5: Front Panel LED Patterns During Normal Operation
LED Location
Port Status LED Above
each port,
on left
SAN Switch 2/16 Version 3.1.2 Installation Guide
LED Color
Display
No light
Steady green
Slow-flashing
green
Fast-flashing
green
Flickering
green
Flashing or
steady yellow
Steady orange
Slow-flashing
orange
Hardware
Status
No light or signal Check media and
cable.
carrier (media or
cable) is detected.
Port is online No action
(connected to an required.
external device)
but has no traffic.
The port is online Verify correct
device is
but segmented,
connected to port.
indicating a
loopback cable or
incompatible
switch.
The port is in No action
internal loopback required.
(diagnostic).
Port is online, with No action
traffic flowing required.
through port.
POST is running. No action
required.
Port is receiving No action
light or signal required.
carrier, but is not
yet online.
The port is Reset the switch
disabled from a
(result of management
diagnostics or station.
portDisable
command).
Managing the SAN Switch 2/16
Recommended
Action
55