Hafm Application; Effect Of No Lan Connection To Hafm Server During Boot - HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note

Losing LAN Connection to the HAFM Server When Logged into the

HAFM Application

If the LAN connection to the HAFM server is lost while you are logged into the
HAFM application, the application will stop. When the connection is restored, the
following error message displays "Connection to the HAFM server
lost. Click OK to exit the application."
Workaround
The LAN connection must be restored and the HAFM application must be
restarted. Stopping the HAFM application has no impact on the Fibre Channel
operations of any switch or director. Monitoring switch operations, logging
events, and implementing configuration changes are interrupted only while the
LAN is not connected.
Effect of No LAN Connection to HAFM Server During Boot Up
If the HAFM server has no LAN connection while booting up, but is connected
after booting up, the remote client sessions to the HAFM server will not be
allowed. Also, the IP address that displays in the HAFM Product View window
title bar may be incorrect.
Workaround
This can be corrected by restoring the LAN connection, and rebooting the server.
Rebooting the server has no impact on the Fibre Channel operations of any switch
or director. Only monitoring switch operations, logging events, and implementing
configuration changes are interrupted.
HA-Fabric Manager Release Notes
Known Issues
17