Displaying Snmp Status - Cisco Catalyst 3750 Software Configuration Manual

Chapter 24 Configuring SNMP
This example shows how to send Entity MIB traps to the host cisco.com. The community string is
restricted. The first line enables the switch to send Entity MIB traps in addition to any traps previously
enabled. The second line specifies the destination of these traps and overwrites any previous
snmp-server host commands for the host cisco.com.
Switch(config)# snmp-server enable traps entity
Switch(config)# snmp-server host cisco.com restricted entity
This example shows how to enable the switch to send all traps to the host myhost.cisco.com using the
community string public:
Switch(config)# snmp-server enable traps
Switch(config)# snmp-server host myhost.cisco.com public

Displaying SNMP Status

To display SNMP input and output statistics, including the number of illegal community string entries,
errors, and requested variables, use the show snmp privileged EXEC command.You can also use the
other privileged EXEC commands in
the fields in the output displays, refer to the Cisco IOS Configuration Fundamentals Command
Reference for Release 12.1.
Table 24-5 Commands for Displaying SNMP Information
Feature
show snmp
show snmp engineID [local | remote]
show snmp group
show snmp user
Though visible in the command-line help strings, the fru-ctrl keyword is not supported. The
Note
snmp-server enable informs command is not supported. To enable the sending of SNMP inform
notifications, use the snmp-server enable traps command combined with the snmp-server host
host-addr informs command.
78-15870-01
Table 24-5 to display SNMP information. For information about
Default Setting
Displays SNMP statistics.
Displays information on the local SNMP engine and all
remote engines that have been configured on the device.
Displays information on each SNMP group on the network.
Displays information on each SNMP user name in the
SNMP users table.
Catalyst 3750 Metro Switch Software Configuration Guide
Displaying SNMP Status
24-15