Monitoring And Maintaining The Ip Network - Cisco WS-C3550-12G Software Configuration Manual

Monitoring and Maintaining the IP Network

Command
Step 5 accept-lifetime start-time {infinite | end-time | duration
seconds}
Step 6 send-lifetime start-time {infinite | end-time | duration
seconds}
Step 7
end
Step 8 show key chain
Step 9
copy running-config startup-config
To remove the key chain, use the no key chain name-of-chain global configuration command.
Monitoring and Maintaining the IP Network
You can remove all contents of a particular cache, table, or database. You can also display specific
statistics. Use the privileged EXEC commands in
Table 22-12 Commands to Clear IP Routes or Display Route Status
Command
clear ip route {network [mask | *]}
show ip protocols
show ip route [address [mask] [longer-prefixes]] |
[protocol [process-id]]
show ip route summary
show ip route supernets-only
show ip cache
show route-map [map-name]
Catalyst 3550 Multilayer Switch Software Configuration Guide
22-64
Purpose
(Optional) Specify the time period during which the key
can be received.
The start-time and end-time syntax can be either
hh:mm:ss Month date year or hh:mm:ss date Month
year. The default is forever with the default start-time
and the earliest acceptable date as January 1, 1993. The
default end-time and duration is infinite.
(Optional) Specify the time period during which the key
can be sent.
The start-time and end-time syntax can be either
hh:mm:ss Month date year or hh:mm:ss date Month
year. The default is forever with the default start-time
and the earliest acceptable date as January 1, 1993. The
default end-time and duration is infinite.
Return to privileged EXEC mode.
Display authentication key information.
(Optional) Save your entries in the configuration file.
Table 22-12
Purpose
Clear one or more routes from the IP routing table.
Display the parameters and state of the active routing protocol
process.
Display the current state of the routing table.
Display the current state of the routing table in summary form.
Display supernets.
Display the routing table used to switch IP traffic.
Display all route maps configured or only the one specified.
Chapter 22 Configuring IP Unicast Routing
to clear routes or display status:
78-11194-03