Monitoring And Maintaining The Ip Network - Cisco Catalyst 3750-E Software Configuration Manual

Chapter 40 Configuring IP Unicast Routing
Command
Step 7
end
Step 8 show key chain
Step 9 copy running-config startup-config
To remove the key chain, use the no key chain name-of-chain global configuration command.

Monitoring and Maintaining the IP Network

You can remove all contents of a particular cache, table, or database. You can also display specific
statistics. Use the privileged EXEC commands in
Table 40-17 Commands to Clear IP Routes or Display Route Status
Command
clear ip route {network [mask | *]}
show ip protocols
show ip route [address [mask] [longer-prefixes]] |
[protocol [process-id]]
show ip route summary
show ip route supernets-only
show ip cache
show route-map [map-name]
OL-9775-08
Purpose
Return to privileged EXEC mode.
Display authentication key information.
(Optional) Save your entries in the configuration file.
Table 40-17
Purpose
Clear one or more routes from the IP routing table.
Display the parameters and state of the active routing protocol
process.
Display the current state of the routing table.
Display the current state of the routing table in summary form.
Display supernets.
Display the routing table used to switch IP traffic.
Display all route maps configured or only the one specified.
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
Monitoring and Maintaining the IP Network
to clear routes or display status:
40-105