Configuring Junos Device Features - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.
You can edit the same configuration parameters from NSM as you can in the native GUI,
except that you cannot perform the following operations:
View the system status as presented in the System Status screen in either a Secure
Access device or an Infranet controller device. However, you can view status information
on the Investigate panel of NSM.
Edit Secure Access or Infranet Controller device licensing information, although you
can view it.
Create clusters, join nodes to clusters, or enable or disable cluster nodes.
Manage the device configuration as a text-based file.
Execute device-specific troubleshooting commands.
Use the technical support service that allows packaged collections of information for
remote analysis by Juniper Networks Technical Assistance Center (JTAC).
Reboot the device.
The view of the configuration from NSM might also be missing data configured in large
binary files. When you initially import a Secure Access or Infranet Controller configuration
into NSM, large binary data files are replaced with stubs. If you want to manage these
files on NSM, you must import them separately as shared objects, and then link to those
objects from the stubs in the device configuration. See "Managing Large Binary Data Files
(Secure Access and Infranet Controller Devices Only)" on page 271 for details.

Configuring Junos Device Features

You can configure Junos device features in NSM. Although the configuration screens
rendered in NSM look different, the top-level configuration elements present are mostly
the same as for the native GUI configuration screens, and correspond to commands in
the CLI.
See the NSM documentation for the following specific device families for details about
configuring specific device parameters:
J Series Services Routers and SRX Series Services Gateways
Configuring J Series Services Routers and SRX Series Services Gateways Guide
(
http://www.juniper.net/techpubs/en_US/nsm2010.3/information-products/
pathway-pages/J Series-SRX Series-devices/index.html
EX Series switches
Configuration Guide for EX Series Devices
(http://www.juniper.net/techpubs/software/management/security-manager/
nsm2010.3/nsm-ex-series-book.pdf)
M Series and MX Series devices
M Series and MX Series Devices Guide
(
http://www.juniper.net/techpubs/en_US/nsm2010.3/information-products/pathway-pages
/m-mx-devices/m-mx-series.html
)
)
Chapter 5: Configuring Devices
195