Groups View; Menu Options In The Topology Map View - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Groups View

Menu Options in the Topology Map View

Copyright © 2010, Juniper Networks, Inc.
subnet contains devices that are not part of a specific subnet or with undiscovered subnet
information. Double-click on a cloud icon to view devices within the particular subnet.
Connections between devices in two different subnet clouds are depicted by a numbered
link, that indicates the link count between devices in different subnet clouds.
The view shows groups of managed devices that have already been created;
Groups
each group is represented by a cloud icon. You cannot assign devices and create groups
from within the topology manager. Double-click on a cloud icon to view the devices within
that particular group. Connections between devices in two different clouds are depicted
by a numbered link, which indicates the link count between the devices in each cloud.
Multiple discovered links that are part of a Link Aggregation Group (LAG) are displayed
as a single distinctive link between the interfaces.
You can perform the following actions from the right-click menu in the topology map
view.
Use this tool to locate a specific device within a particular topology
Locate Devices:
view. To find a device within a topology cloud:
Expand a topology cloud in the subnets or groups map view.
1.
Right-click in the map view and select the
2.
Provide the name, MAC address, or IP address of the device in the dialog.
3.
Select OK to locate the device with matching criteria in the map.
4.
Use this tool to locate a particular subnet cloud in the subnets topology
Locate Subnets:
map view.
Open the subnets topology view.
1.
Right-click in the view and select the
2.
Provide the name or ID of the subnet in the dialog.
3.
Select OK to locate the subnet matching the given criteria.
4.
Use this tool to locate a particular group cloud in the groups topology
Locate Groups:
map view.
Open the Groups topology view.
1.
Select the
2. Locate Groups
Provide the Group name in the popup dialog.
3.
Select OK to locate the group matching the given criteria.
4.
Use this menu option to view all the devices in a selected subnet cloud.
Show Devices:
Locate device
Locate subnets
option from the right-click menu.
Chapter 14: Topology Manager
option.
option.
629