Creating A Url Filtering Profile - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Creating a URL Filtering Profile

Copyright © 2010, Juniper Networks, Inc.
Set filters. You can select from existing lists or create new lists for each filter by
8.
clicking beside the field.
+
Permitted command list
Block command list
Block extension list
Block mime list
Block mime list except
Select
9. OK.
Based on your requirements, you can use URL filtering to prevent malicious or suspicious
URLs from transferring their data. For example, you might wish to filter out gaming or
entertainment sites.
Select
1. Object Manager
UTM UF Profiles on top and Custom UTM UF Profiles below. You can only view but
not edit the listed predefined profiles. You can create and edit custom profiles.
Select + in the Custom UTM UF Profiles
2.
opens.
Enter a name for the profile.
3.
Enter a comment or description.
4.
Select a color from the drop-down list.
5.
Select the engine type. If you select Surf-control Integrated, set the following:
6.
Default action: Block or permit.
Timeout period: In the range of 1-1800. Mouse over the field to see a tool tip with
the allowed values.
Enter a deny message.
Set Fallback actions- either deny or permit- for the following: Default, Server Conn,
Time out, Too many requests.
Select the list of categories to filter. You can edit the existing list or add a new one
by clicking . You can permit or deny each of the categories.
+
If you select Websense Redirect as the engine, set the following properties:
Enter server information: Host name, Port in the range 1024- 65535, Sockets in
the range 1-8. Mouse over the field to see a tool tip with the allowed values.
Enter account name.
Select Timeout period: In the range of 1-1800.
> > . NSM displays two tables: Predefined
UTM URL Filtering
table. The New URL Filtering Profile window
Chapter 8: Configuring Objects
365