Figure 44: Example Of Setting Values In A Template; Applying The Template - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Figure 44: Example of Setting Values in a Template

Click OK to save the template. You can now use this template when configuring
5.
security devices.
NOTE: In an SA, IC or Junos templates, default values for the configuration parameters
are the default values from the schema. Default values are not displayed for
configuration parameters that are based on match conditions such as device platform
or release version.

Applying the Template

Apply the template as follows:
Ensure that the device you want to apply the template to has been added or modeled
1.
in the management system.
In the navigation tree, select Device Manager > Devices, and then double-click the
2.
device to open the device editor.
In the device navigation tree, select Info > Templates. The templates configuration
3.
screen appears.
Click the Edit icon. The Edit Templates dialog box appears.
4.
Select the DNS template.
5.
Chapter 5: Configuring Devices
199