Figure 99: Server Monitor (Machine-Wide Info); Table 80: Server Monitor (Machine-Wide Info) Data - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Figure 99: Server Monitor (Machine-wide Info)

Table 80 on page 691 lists and describes the columns that appear in the Server Monitor:

Table 80: Server Monitor (Machine-wide Info) Data

Indicator Description
Name Name of the GUI Server or Device Server.
Server Type Whether the current server is a GUI Server, GUI Server Cluster, Device
Server, or Device Server Cluster.
Status Status of the server based on CPU or memory utilization:
OK
Warning
Critical
Down
Note: By default, the Status field for each server appears Green (OK) if
the usage on either the CPU, memory, or disk is less than 90%. It appears
Yellow (Warning) if the usage on either the CPU, memory, or disk is
greater than 90%. You can edit the settings that apply for the Status
indicators using Tools>Preferences>Alert Settings.
CPU Status based on CPU utilization:
OK (CPU usage < 90%)
Warning (CPU usage = 90-95%)
Critical (CPU usage > 95%)
N/A (when the server is down)
Chapter 17: Realtime Monitoring
691