Refreshing Profiler Data; Viewing Database Information - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
714
Right-click on any filter criteria on any entry in the Profiler view and select Clear Column
Filter to disable filtering on entries that match the criteria set.
Right-click on any filter criteria or on any entry in the Profiler view and select Clear All
Column Filters to disable all filtering.
NOTE: The Application Profiler view is not automatically updated when you add, delete,
or modify filters. To update the Application Profiler view with the latest application
session data, select the application you want to refresh and then click the refresh icon,
in the top right corner of the Profiler view.
You can perform any of the following actions on any Application header:
Select All—Selects all the applications in the session view.
Clear All—Clears all selections in the session view
Expand All— Expands all applications and loads new data
Collapse All– Collapses all expanded applications
Collapse Selected—Expands selected applications and loads new data
Other options that you can set in the Application Profiler view include:
Sorting— Sort on any column except the Application column. The Application column
does not support sorting because application values are similar for each application
group. When you perform a sort on any other column, only the rows inside the loaded
tables are rearranged.
Rearranging Columns—Drag a column header to a new position in the table to rearrange
the order of the columns in the viewer.

Refreshing Profiler Data

NSM fetches data from each of the devices that you are profiling automatically. By
default, data is fetched from three devices in sequence. When the Device Server finishes
fetching data from one device, it begins the operation on the next available device.
NOTE: You can change the default behavior that the Profiler uses to fetch data by
editing parameters in the Device Server configuration file. Refer to the Network and
Security Manager Installation Guide for more information.
Click on the Refresh icon periodically to refresh the Profiler view with the latest data
available.

Viewing Database Information

Click on the Show DB Information icon to view specific details about the Profiler database,
including the database size.
Copyright © 2010, Juniper Networks, Inc.