Example: Creating And Applying A Device Template For Dns Settings - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Example: Creating and Applying a Device Template for DNS Settings

198
NOTE: When you change a template, one or more devices that use the template might
become invalid. For example, the change could cause a required field to be missing or
a field value to be outside the allowed range.
In this example, you create and apply a template that configures the IP addresses of
primary and secondary DNS servers for ScreenOS devices.
Creating the Template
Create the template as follows:
In the navigation tree, select Device Manager > Device Templates.
1.
Click the Add icon in the Device Template Tree or the Device Template List and
2.
select ScreenOS/IDP Template from the list.
The New Device Template dialog box displays the template navigation tree in the
left pane and the Info screen in the right pane.
In the Info screen, enter DNS in the Name field.
3.
From the template navigation tree, select Network > DNS > Settings. Configure the
4.
following:
For Primary DNS Server IP, enter 1.1.1.1.
For Secondary DNS Server IP, enter 2.2.2.2.
For DNS Refresh Schedule, select Refresh Daily. Leave all other default settings.
The From Object icon shows where the values are set.
Copyright © 2010, Juniper Networks, Inc.