Figure 72: Adding A Shared Binary Data Object - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Figure 72: Adding a Shared Binary Data Object

Link the shared object to the corresponding node in the device configuration tree:
4.
In the Device Manager, double-click the Secure Access or Infranet Controller
a.
device to open the device editor, and then select the Configuration tab.
Navigate to the node in the configuration where you want to load the binary file.
b.
For example, to load an ESAP package, expand Authentication and then select
Endpoint Security. In the Host Checker tab, select Endpoint Security
Assessment Plug-Ins, and then click the Add icon.
Chapter 7: Managing Devices
273