Figure 43: Secure Access Device Object; Configuring Secure Access Or Infranet Controller Device Features - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
194

Configuring Secure Access or Infranet Controller Device Features

For Secure Access Devices and Infranet Controller Devices you can configure most of
the same parameters through NSM that you can configure through the native device GUI
or with the device CLI. The configuration screen rendered in NSM for any Secure Access
or Infranet Controller device looks similar to that of the native GUI. Figure 43 on page 194
compares the two user interfaces. In this example, the view is of the Network Settings
screen.

Figure 43: Secure Access Device Object

For details about configuring Secure Access devices, see the Configuring Secure Access
Devices Guide (
http://www.juniper.net/techpubs/en_US/nsm2010.3/information-products/pathway-pages/
secure-access-devices/index.html
devices, see the Configuring Infranet Controllers Guide
(
http://www.juniper.net/techpubs/en_US/nsm2010.3/information-products/pathway-pages/
infranet-controller-devices/index.html
). For details about configuring Infranet Controller
).
Copyright © 2010, Juniper Networks, Inc.