Table of Contents
Advertisement
Network and Security Manager Administration Guide
MS-RPC:ERR:CL-PTYPE-IN-CO-PDU
MS-RPC:ERR:CO-PTYPE-IN-CL-PDU
MS-RPC:ERR:EPM-INV-LHS-LEN
MS-RPC:ERR:EPM-INV-OP-NUM
MS-RPC:ERR:EPM-INV-RHS-LEN
MS-RPC:ERR:EPM-INV-TOWER-LEN
MS-RPC:ERR:EPM-WRONG-LHS-LEN
MS-RPC:ERR:EPM-WRONG-RHS-LEN
MS-RPC:ERR:EPM-WRONG-TOWER-LEN
MS-RPC:ERR:FRAG-BIGGER-THEN-NEG
MS-RPC:ERR:FRAG-LEN-TOO-SMALL
MS-RPC:ERR:INV-AUTH-LEN
MS-RPC:ERR:INV-AUTH-PAD-LEN
MS-RPC:ERR:INV-PTYPE
MS-RPC:ERR:LEN-CONFLICT
MS-RPC:ERR:RESPONSE-NO-REQ
900
This protocol anomaly is an MSRPC connection-oriented
message with a packet type that is allowed only in
Connectionless PDUs.
This protocol anomaly is a connectionless MSRPC message
with a packet type that is allowed only in
connection-oriented PDUs.
This protocol anomaly is an EPM message with an LHS
length that is larger than the rest packet length.
This protocol anomaly is an invalid EPM operation number.
This protocol anomaly is an EPM message with an RHS
length that is larger than the rest packet length.
This protocol anomaly is an EPM message with a tower
length that is larger than 8192 bytes, or larger than the rest
fragment length.
This protocol anomaly is an EPM packet with a UUID LHS
length that is not equal to 19.
This protocol anomaly is an EPM message with an RHS
length that is larger than the rest packet length.
This protocol anomaly is an EPM message with a tower
length that is inconsistent with message's LHS and RHS
lengths.
This protocol anomaly is a MSRPC fragment length that is
larger than the negotiated maximum.
This protocol anomaly is an MSRPC fragment length that is
less than the common header length.
This protocol anomaly is an MSRPC message with an
authentication length that is larger than the entire MS-RPC
message payload length.
This protocol anomaly is an MSRPC message with
authentication padding length plus authentication section
length that is larger than the entire MSRPC message payload
length.
This protocol anomaly is an MSRPC message that contains
an invalid packet type value.
This protocol anomaly is an MSRPC connectionless message
with a fragment length that conflicts with the common
header length and the whole message length.
This protocol anomaly is an MSRPC response that precedes
the request.
medium
sos5.1.0
medium
sos5.1.0
high
sos5.1.0
medium
sos5.1.0
high
sos5.1.0
high
sos5.1.0
high
sos5.1.0
high
sos5.1.0
high
sos5.1.0
medium
sos5.1.0
high
sos5.1.0
high
sos5.1.0
high
sos5.1.0
medium
sos5.1.0
high
sos5.1.0
medium
sos5.1.0
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
- Juniper 200 Series