Table 66: Device Status Information; Monitoring Idp Sensors; Viewing Idp Device Status - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Monitoring IDP Sensors

Viewing IDP Device Status

676
Table 65: HA Statistics View (continued)
Item
Rx Heartbeat
Use the Device Monitor to get an at-a-glance view of the current status of all the IDP
sensors in your network.
Table 66 on page 676 lists and describes information about IDP sensors that you can view
through the Device Monitor:

Table 66: Device Status Information

Column Description
Name Unique name assigned to the sensor in NSM.
Domain Domain in NSM in which the sensor is managed.
NOTE: If you have configured multiple subdomains, you can view all your
managed devices from the global domain.
Platform Model number of the sensor.
OS Version IDP firmware version running on the sensor.
Config Status Current configuration status of the sensor in NSM:
None. No state has been set (does not show in Device Monitor).
Modeled. The sensor exists in NSM, but a connection to the sensor has
not yet been established.
RMA. Equivalent to bringing the sensor into the Modeled state. RMA results
from an administrator selection in the User Interface when a sensor goes
down.
Waiting for 1st connect. NSM is waiting for the sensor to connect. You
must enter a command on the sensor to make it connect to NSM.
Import Needed. You must import the configuration of the sensor into NSM.
When you add a sensor for the first time, verify that your status indicates
"Import Needed" before you attempt to import the sensor. During
migration, this state indicates that import of the sensor configuration is
still required.
Await Migration. After you have migrated your data in IDP Manager, the
Config Status on each sensor displays that it is awaiting migration. It
remains in this state until you have migrated the sensor.
Update Needed. An update to this sensor is required.
Managed. The sensor is currently being managed by NSM.
Description
The number of received heartbeats on the security devices.
Copyright © 2010, Juniper Networks, Inc.