Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual page 831

Copyright © 2010, Juniper Networks, Inc.
NOTE: For the Targets and Devices columns, you can specify filtering based on domain,
category, or object, or the complete domain/category/object row value.
Select the filter settings you wish to apply for the specified column, then click OK.
3.
To select additional Audit Log Viewer columns for filtering log entries, repeat Step
4.
2 and Step 3.
The types of filters that you create are shown at the bottom of the Window next to
Filtered On. Filters are added or removed immediately.
NSM applies the filter to all log entries and displays only the log entries that match the
specified Audit Log Viewer columns.
To clear Audit Log Viewer columns that are selected for filtering log entries:
Select View>Set Filter.
1.
To clear a single column: Clear the column check box that you do not want to use
2.
for filtering log entries, then click OK.
To remove all columns, click Clear All.
Filtering Audit Log Entries On Column Field Values
You can set filters based on Audit Log Viewer column field values.
To set a column field filter, right-click a column field and select Filter to display the filter
menu options:
Time-based column filter— To create a time-based filter, right-click a field in the Time
Generated column and select Filter. The following filter menu options are displayed:
Edit— Displays the Filter dialog box for the column, then you select the start and
end time and dates you want to filter on.
To filter on a specific start time, select From and configure the start date and time.
When applied, this filter displays log entries for events that were generated or
received after or at the specified start time.
To filter on a specific end time, select To and configure the end date and time.
When applied, this filter displays log entries for events that were generated or
received before or at the specified end time.
To display audit log entries for objects generated within the start and end date
and time, click OK.
>= This Value— Displays log entries for events that were generated at or after the
time specified in the selected row cell.
<= This Value— Displays log entries for events that were generated before or at the
time specified in the selected row cell.
Chapter 19: Logging
781