Setting Report Options; Naming A Report; Setting The Report Type - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Setting Report Options

Naming a Report

Setting the Report Type

812
Click Browse to save the file onto CD or to any other location on your desktop.
3.
Click Export. The report is exported onto your CD.
4.
NSM saves the report in several file formats (such as .png, .html, and .gif) that you can
later display in any Web browser.
By default, each report in NSM provides information based on data available from the
current day in a horizontal bar chart. You can configure the duration, number of data
points, and appearance of each report by using the Set Report Options selection in the
View menu.
NOTE: You can also access the Set Report Options dialog by right-clicking the chart
on each report.
Use the Set Report Options selection in the View menu to tailor your reports to display
only the specific information that you want. You can configure the following options in
each report:
Report title
Report type
Columns for the report
Time period
Data point count
Chart type
You can also access the Set Report Options dialog by right-clicking the chart on each
report.
You can enter a name for a new report or rename an existing report in the General tab
of the Set Report Options window. You can also configure the name of the report
displayed in the report graph by editing its title.
You can create two types of reports:
Time-Based—Displays activity over time. For example, the Attacks Over Time report
is a time-based report that measures the top attacks recorded in log records over a
specified period.
Count-Based—Displays total current activity to date. For example, the Top Scan Targets
report is a count-based report that displays the total number of scans currently recorded
against a specified number of destination IP addresses.
Copyright © 2010, Juniper Networks, Inc.