Table of Contents
Advertisement
Network and Security Manager Administration Guide
744
Send packet data to NSM along with log data and store it on the NSM server. For IDP
4.0, this option is the default setting.
NOTE: This feature is available for IDP sensors only.
There is a maximum limit of how much packet data can be stored on the IDP sensor.
When the limit is reached, the IDP sensor overwrites older packet data, purging it from
the sensor. The maximum size for each log is 800KB. Packet data stored on the NSM
server, whether retrieved after being stored on the IDP sensor or included with the log
data, is stored permanently on the NSM server until or unless it is purged by the user.
To store the packet data on the IDP sensor, double-click an IDP sensor, select Report
Settings in the navigation tree, and then uncheck Include packet data in log.
To send the packet data to NSM with the log data, double-click an IDP sensor, select
Report Settings in the navigation tree, and then select Include packet data in log if it is
not already selected.
To view a log with packet data, go to the main navigation tree and select Log Viewer,
right-click the log containing the packet data, and then select Show > Packet Data. See
Figure 103 on page 745.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
- Juniper 200 Series