Configuring Objects For Rules; Applying The Same Object To Multiple Rules - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Configuring Objects for Rules

Copyright © 2010, Juniper Networks, Inc.
Rulebases—When you initially create a security policy, only the Firewall rulebase and
possibly the IDP rulebase appear by default. To create a rule in other rulebases, you
must manually add those rulebases to the policy.
The following sections detail these options.
Objects are reusable logical entities that represent specific settings, configurations, or
external pieces of hardware. You can reuse objects in multiple areas in the NSM GUI.
Within rules, you use objects to define the source, destination, and service, as well as to
specify settings for rule options, such as Web Filtering or attack protection.
For some object types, such as services and IDP attack objects, NSM contains a database
of predefined objects. If the predefined objects do not meet your networking requirements,
you can create custom objects and add them to the object database. For other object
types, such as address objects, DI profiles, and Global MIPS, no predefined objects exist;
before you can use one of these objects in a rule, you must create the object in Object
Manager.

Applying the Same Object to Multiple Rules

You can apply the same object (column value) to a selection of policy rules. Rule groups
must be in an expanded state to apply the same object to the rules of a rule group.
Columns that disallow duplicate values, such as the rule ID and No. columns cannot be
used to apply the same object to a selection of rules.
NOTE: You cannot apply the same object to a selection of rules for Predefined policies,
VPN rules, or Central rules on a Regional Server regular policy.
To apply the same object to a selection of policy rules:
Select all the rules to which the column value will be applied:
1.
To select all the rules in a rulebase, click on any rule in the rulebase and press Ctrl
+ a.
To select a contiguous range of rules in a rulebase, press Shift + Ctrl and select
the rules.
To select a noncontiguous range of rules in a rulebase, press Ctrl and select the
rules.
Right-click on the column value of the rule that you want to apply to the selected
2.
rules and select Apply value to selected rules from the menu.
The selected column value is applied to all selected rules.
NOTE: After you select the rules, a right-click on any column value displays the menu
"Apply Value to selected rules," and no other menu options are available for the selected
column value.
Chapter 9: Configuring Security Policies
439