Table of Contents
Advertisement
Viewing Additional Device Detail and Statistics
Copyright © 2010, Juniper Networks, Inc.
If a device is running, you can view additional status, using Device Detail Status and view
traffic-related statistics and other information, using View Statistics.
NOTE: If a security device has never connected, the Device Detail Status and Statistics
views for the device are not available.
Viewing Device Details
Double-click on any device to view additional details on the device related to resource
usage. You can also right-click on the device and select View Details.
NOTE: The information in the Details window appears slightly different for firewall/VPN
devices and IDP sensors. Details for IDP sensors include an additional tab showing
process status.
Table 51 on page 655 lists and describes the information that you can view for a security
device through the Device Detail Status:
Table 51: Device Detail Status Items
Item
Description
OS Version
ScreenOS firmware version running on the device.
Mode
Current operation mode of the device. Network Address Translation (NAT),
Transparent, or Route.
Latest Reboot
Most recent date and time that the security device was powered off and on.
You can use this information to determine how long the security device was
down.
CPU Utilization
The percent of the CPU being used at the moment of the status snapshot.
One Min. Load
The percent CPU utilization average on the security device for the last
minunte.
5 Min. Load
The percent CPU utilization average on the security device for the last 5
minutes.
15 Min. Load
The percent CPU utilization average on the security device for the last 15
minutes.
Mem Allocated
The original amount of memory allocated to the security device.
Mem Left
The amount of allocated memory that remains unused by the security device.
Mem Fragmented
The amount of fragmented memory.
Chapter 17: Realtime Monitoring
655
Advertisement
Table of Contents
