Configuring Icap Av Profiles - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
372
To create a server group, first create the server objects that will go into it. However, you
can create an empty group as a place holder.
You can assign a server to more than one server group.

Configuring ICAP AV Profiles

ICAP AV profiles, when assigned to a policy, redirect traffic to an ICAP AV server.
To create an ICAP AV Profile, select Object Manager > UTM >ScreenOS >AV Objects
> ICAP > Custom Profiles. Click the add icon.
You need the following information:
General information—Assign a name and color to the profile, and enter a comment
describing the purpose of the profile.
HTTP tab:
HTTP Enable: Selecting this check box in each tab turns on scanning for that protocol.
Skip Mime: If checked, causes the scanner to skip any mime types listed in the Mime
List field.
Time out: Scans that take longer than this time out and are not completed.
Mime List: If Skip Mime is checked, also specify the MIME list that will be used for
comparison. See "Multipurpose Internet Mail Extension (MIME) Lists" on page 366 for
information on creating MIME lists.
SMTP tab:
SMTP Enable: Selecting this check box in each tab turns on scanning for that protocol.
Time out: Scans that take longer than this time out and are not completed.
Email Notification for Virus - Notify Sender: Notifies an e-mail sender if a virus was
found in the e-mail.
Email Notification for Scan - Notify Sender: Notifies an e-mail sender if the e-mail
was dropped due to a scan error.
Email Notification for Scan - Notify Recipient: Notifies an e-mail recipient if the e-mail
was passed due to a scan error.
ICAP tab:
ICAP Server/Server Group: Assign an ICAP AV server or server group to this profile.
See "Configuring ICAP AV Servers and Profiles" on page 371 for information on creating
ICAP AV servers and server group objects in NSM.
Request URL: The request URL on the ICAP AV server.
Response URL: The response URL on the ICAP AV server.
Copyright © 2010, Juniper Networks, Inc.