Table of Contents
Advertisement
Network and Security Manager Administration Guide
674
Source, Destination, and Translated IP (IP Address, Net Mask, and Port Range)
Session Duration
Session Start Date and Time
Policy ID
Session Type
Protocol ID
Policy with Logging
Click More to view additional criteria.
Click Reset to Default to reset all criteria back to their default settings.
Click OK when you are done.
Click Refresh to apply the criteria to the active session table view.
Configuring a Session Display Filter
You can apply a session display filter to view only specific active sessions.
From the Options menu, select Session Display Filter. The Session Filter dialog box
1.
appears.
From the Source tab, you can specify the sessions that you want to view according
2.
to the Source IP Address and Port number, or Port Range.
Click in the Destination tab to specify the sessions that you want to view according
3.
to Destination IP Address and Port number, or Port Range.
Click in the Translated tab to specify the sessions that you want to view according
4.
to Translated IP Address and Port number, or Port Range.
Click in the Protocol tab to specify the sessions that you want to view according to
5.
protocol.
Click in the Other tab to specify the sessions that you want to view according to
6.
Session Duration, Session Start Time, or Policy ID.
Click OK when you are done.
7.
Click Refresh to apply the Session Display criteria to the active session table view.
8.
Troubleshooting
From the
Device Manager,
Troubleshoot
option to issue common CLI commands (such as
security device using Telnet or a Secure Command Shell to troubleshoot problems. You
can also add, delete, edit or search for custom CLI commands using the
Custom Troubleshoot Commands
window.
To troubleshoot a device:
you can right-click on any security device and select the
option under the
Tools
get
,
exec
,
debug
) to a
Add/Delete
menu in the
Device Manager
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
- Juniper 200 Series