Table 26: Validation Icons; Configuring Device Features - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Configuring Device Features

Copyright © 2010, Juniper Networks, Inc.

Table 26: Validation Icons

Message
Icon Type Meaning
Error A configuration or parameter is not configured correctly
in the NSM UI. Updating a device with this modeled
configuration will cause problems on the device.
Warning A configuration or parameter is not configured correctly
in the NSM UI. Updating a device with this modeled
configuration might cause problems on the device.
Override The displayed value was set manually and that the value
overrides whatever value might come from a template
or configuration group. The icon can also indicate an
override of a VPN-provided value or a cluster-provided
value. Changes to a template will not change this value
unless "Remove conflicting device values" is selected in
the Template Operations dialog box.
Template The value was inherited from a template. Changes to
Value the template are also shown in the device edit dialog
box.
Configuration The value was inherited from a configuration group.
Group Values Changes to the configuration group are also shown in
the device editor.
From Object A value is set for a field in a template or configuration
group definition. This icon is shown only in a template or
configuration group definition.
From Object messages appear only when you view
template objects to help find fields set in the template.
When more than one type of icon appears within a panel, the highest priority icon appears
next to the icon in the tree and the panel title bar.
To configure a device that has been added, imported, or modeled in NSM:
In the navigation tree, select Device Manager > Devices.
1.
Open the device configuration using one of the following methods:
2.
Double-click the device object in the security device tree or the device list.
Select the device object and then click the Edit icon.
Right-click the device object and select Edit.
For ScreenOS and IDP devices, the device navigation tree appears on the left,
listing the device configuration parameters by function.
Chapter 5: Configuring Devices
Priority
Highest
Lowest
191