Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Figure 97: View Tokyo Routing Table for RB Site-to-Site VPN, MK
Click OK to save your changes to the virtual router, then click OK to save your changes
18.
to the Tokyo device.
Configure the Paris Tunnel Interface:
In Device Manager, double-click the device icon for Paris to open the device
1.
configuration.
In the device navigation tree, select Network > Interface. Click the Add icon and
2.
select Tunnel Interface. The General Properties screen appears.
Configure the following, then click OK:
3.
For Zone, select untrust.
For IP Options, select Unnumbered.
For Source Interface, select ethernet3.
Create the Paris VPN:
4.
In the device navigation tree, select VPN Settings > AutoKey IKE/Manual VPN.
Select the Manual tab, then click the Add icon. The Properties screen appears.
Configure the following:
5.
For Name, enter Paris_Tokyo.
For Gateway, enter 2.2.2.2.
For Local SP, enter 3020.
For Remote SPI, enter 3030.
For Outgoing Interface, select ethernet3.
For ESP/AH, select ESP CBC.
Chapter 12: Configuring VPNs
611
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
- Juniper 200 Series
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 and is the answer not in the manual?